Tag: conventional loan

  • Types of Mortgage Loans: Conventional, FHA, VA, USDA

    Types of Mortgage Loans: Conventional, FHA, VA, USDA

    When lenders ask “what kind of loan are you looking for?”, they usually mean the loan type: conventional, a government-backed loan such as FHA, VA or USDA, or a special program. The type you choose affects your down payment, your mortgage insurance and the total cost of the loan. This guide follows the US Consumer Financial Protection Bureau (CFPB) explanations so you can walk into lender conversations prepared.

    Quick answer

    Short answer: Every mortgage has three parts: the loan type, the loan term and the interest rate type. Conventional loans are the majority and typically cost less than FHA loans, but they can be harder to get. FHA loans allow a low down payment and lower credit scores. VA loans are for eligible veterans, servicemembers and surviving spouses. USDA loans serve low- to moderate-income borrowers in rural areas (CFPB).

    Key takeaways

    • Three choices: loan type, loan term, interest rate type.
    • Conventional: not part of a government program; most common.
    • FHA: low down payment, available with lower credit scores.
    • VA: no monthly mortgage insurance, but usually an upfront fee.
    • USDA: zero down payment, with an upfront fee plus ongoing mortgage insurance.

    Why the loan type matters

    The CFPB says your loan type affects three things: how much you need for a down payment, the total cost of the loan (including interest and mortgage insurance) and how much you can borrow. Sometimes only one type fits your situation. If several do, the CFPB suggests trying out scenarios and asking lenders for several quotes.

    Conventional loans

    “Conventional” simply means the loan isn’t part of a specific government program (CFPB). There are two main groups:

    • Conforming loans have maximum loan amounts set by the government, with other rules set by Fannie Mae or Freddie Mac. If your down payment is less than 20%, you’ll typically need mortgage insurance; see our PMI guide.
    • Non-conforming loans are less standardised. They include jumbo loans above the conforming limit. Eligibility, pricing and features vary widely by lender.

    Note

    Conforming loan limits are set each year and vary by county. Check the current limit for your county with your lender rather than relying on an old figure.

    Government-backed and special programs

    TypeDesigned forMortgage insurance or fees
    ConventionalMost borrowersTypically needed if under 20% down
    FHALow down payment, lower credit scoresAsk your lender; not detailed on the CFPB pages we used
    VAEligible veterans, servicemembers, surviving spousesNo monthly premium; usually an upfront fee
    USDALow- to moderate-income buyers in rural areasUpfront fee plus ongoing premiums
    Loan types at a glance (per the CFPB)

    VA loans are made by private lenders and guaranteed by the Department of Veterans Affairs. The CFPB notes they are available with low or even zero down payments. They may cost more than conventional loans if you have a significant down payment and good credit (CFPB).

    USDA loans offer zero down payments and are usually cheaper than FHA loans, according to the CFPB. Mortgage insurance is required on all of them.

    State and local programs often focus on low- and moderate-income first-time buyers, and some target public service workers. Many offer down payment assistance that can be combined with FHA or conventional loans. Our guide to down payment sources covers more.

    Term and rate type: the other two choices

    The CFPB’s comparison is straightforward. Shorter terms (such as 15 years) mean higher monthly payments but typically lower rates and a lower total cost. Longer terms (such as 30 years) lower the monthly payment but cost more overall. On rate type, a fixed rate stays the same, while an adjustable rate can change after its initial period. Our fixed vs variable guide goes deeper.

    Watch for risky features

    Ask the loan officer about these (CFPB list)

    • A prepayment penalty
    • A balloon payment
    • Negative amortization (the balance can grow)
    • Interest-only payments

    If a loan includes any of these, the CFPB suggests asking why. Ask for another Loan Estimate without the feature so you can compare the costs.

    Tip

    Line up Loan Estimates from at least two or three lenders for the loan types you qualify for. Our Loan Estimate guide shows what to compare.

    Frequently asked questions

    What is a conventional loan?

    A mortgage that isn’t part of a specific government program. Conventional loans typically cost less than FHA loans but can be harder to get.

    Who can get a VA loan?

    Eligible veterans, current servicemembers and surviving spouses.

    Do USDA loans need a down payment?

    The CFPB says USDA loans offer zero down payments, with an upfront fee and ongoing mortgage insurance.

    How do I pick the right loan type?

    Check which types you qualify for, then compare official Loan Estimates side by side.

    Last checked: 16 November 2026 against CFPB pages (loan options modified 18 February 2026; conventional loans modified 16 October 2024; special programs modified 27 June 2024). Educational only, not legal or financial advice.

    This is one of the guides mapped from our mortgages hub for the US and Canada.

  • PMI Explained: How It Works and When It Can Be Removed

    PMI Explained: How It Works and When It Can Be Removed

    If you are buying with less than 20 percent down on a conventional loan, you will probably meet private mortgage insurance, or PMI. It often appears as one more line in your monthly payment, and many buyers are not sure who it protects or whether it lasts forever. This guide explains how PMI works, how you pay for it, and when you have the right to remove it.

    Educational only. The Property Question is not a lender, adviser or lawyer. This article is general education, not financial or legal advice. Rules vary by lender and loan, so confirm details with your lender or servicer and the official sources linked below.

    Quick answer

    PMI is mortgage insurance you might be required to buy on a conventional loan with a down payment of less than 20 percent. It protects the lender, not you. You can usually ask to cancel it when your balance is scheduled to reach 80 percent of the home’s original value, and your servicer generally must end it automatically at 78 percent (CFPB).

    Key takeaways

    • Triggered by: a conventional loan with less than 20% down.
    • Protects: the lender, if payments stop.
    • Request cancellation at: a balance scheduled to reach 80% of original value.
    • Automatic end at: a balance scheduled to reach 78%, if you are current.
    • Midpoint rule: PMI ends the month after the loan’s amortisation midpoint (CFPB).

    What PMI is and who it protects

    The Consumer Financial Protection Bureau (CFPB) describes PMI as a type of mortgage insurance you might have to buy on a conventional loan with less than 20 percent down. It is arranged by the lender and provided by private insurance companies.

    The key point: PMI protects the lender. The CFPB is blunt that if you fall behind on payments, PMI does not protect you, and you can still lose your home through foreclosure. What PMI can do is help you qualify for a loan you might not otherwise get, at an added cost.

    The requirement usually also applies when you refinance a conventional loan with less than 20 percent equity. Government-backed loans work differently: the CFPB notes that mortgage insurance is typically required on FHA and USDA loans too, but under their own rules.

    How you pay for PMI

    The CFPB lists three common ways:

    OptionWhen you payWhere it shows
    Monthly premiumAdded to each mortgage paymentLoan Estimate and Closing Disclosure, page 1, Projected Payments
    Up-front premiumOnce, at closingPage 2, section B
    BothUp front plus monthlyPage 2, section B and page 1
    PMI payment options

    The monthly premium is the most common. With an up-front premium, the CFPB warns that if you move or refinance you might not get a refund.

    Our guide on closing costs explained shows where these lines sit among your other costs.

    Comparing PMI with the alternatives

    PMI is not the only path. The CFPB suggests asking lenders for detailed pricing so you can compare:

    • A higher rate with no PMI: some lenders offer low-down-payment conventional loans without PMI in exchange for a higher interest rate. Whether that costs more depends partly on how long you stay.
    • Other loan programs: such as FHA loans, which may cost more or less depending on your credit score, down payment, lender and market conditions.
    • A bigger down payment: with 20 percent down, PMI is not required on a conventional loan, and you could get a lower rate.
    • Tax questions: the CFPB suggests asking a tax adviser whether interest or PMI affects your taxes differently.

    Tip

    Ask the loan officer to work out total costs over a few realistic timeframes, such as five and ten years. The CFPB recommends this when lenders offer more than one PMI option.

    When PMI can be removed

    These rules come from the CFPB’s explanation of the legal requirements for mortgages on single-family principal residences that closed on or after 29 July 1999. FHA and VA loans have different requirements.

    Your PMI removal path

    1

    Find your PMI disclosure: it shows the first date you can request cancellation.

    2

    Request at 80%: ask your servicer in writing when your balance is scheduled to hit 80% of original value, or earlier if extra payments got you there.

    3

    Meet the conditions: a good payment history, current payments, no junior liens, and evidence the value has not fallen below the original value.

    4

    Automatic end at 78%: your servicer generally must end PMI on the date the balance is scheduled to reach 78%, if you are current.

    5

    Midpoint backstop: PMI must end the month after the midpoint of your amortisation schedule, which is after 15 years on a 30-year loan.

    “Original value” generally means the lower of the contract price or the appraised value when you bought. If you refinanced, it is the appraised value at refinancing (CFPB).

    Note

    Fannie Mae, Freddie Mac and other investors often set their own PMI cancellation guidelines. The CFPB says these cannot be less favourable to the borrower than the legal rules above. Your servicer can tell you which apply.

    A Canada note

    In Canada the comparable product is mortgage loan insurance, which the Financial Consumer Agency of Canada says you’ll typically need when your down payment is less than 20 percent of the price (FCAC). Like PMI, it protects the lender, not you. For how that works, see our Canada first-time buyer basics.

    Frequently asked questions

    Does PMI protect me if I lose my job?

    No. The CFPB says PMI protects the lender. If you fall behind, you can still face foreclosure.

    Can I avoid PMI with less than 20 percent down?

    Sometimes. Some lenders offer no-PMI conventional loans with a higher interest rate instead.

    When can I ask to cancel PMI?

    When your balance is scheduled to fall to 80 percent of the original value, or earlier through extra payments, if you meet the conditions.

    Does PMI end on its own?

    Generally yes, at 78 percent of original value if you are current, or at the loan’s midpoint.

    Last checked: 16 November 2026. Figures are from CFPB pages last reviewed 9 November 2026 (what PMI is) and 28 August 2026 (removing PMI). Rules can change; confirm with your lender or servicer.