Smoke Alarms in a New Home: Placement and Testing

Featured card showing a ceiling smoke alarm and a new-home safety checklist

Moving into a new home brings a long to-do list, and smoke alarms are easy to overlook. You may not know how old the existing alarms are or whether there are enough of them. This guide sets out where smoke alarms should go, how to test them and when to replace them, based on guidance from the National Fire Protection Association (NFPA).

Educational only. The Property Question shares general home safety information, not professional or legal advice. Local building and fire codes vary. Follow the manufacturer’s instructions, check your local rules, and use a qualified electrician for hardwired alarms.

Quick answer

Short answer: Put smoke alarms inside and outside every bedroom and sleeping area and on every level, including the basement. Test them monthly, and replace each unit 10 years after its manufacturing date (NFPA).

Key takeaways

  • Placement: in every bedroom, outside sleeping areas and on every level.
  • Testing: press the test button once a month.
  • Replacement: 10 years after the manufacturing date.
  • Kitchen distance: at least 10 feet (3 metres) from the cooker (NFPA).

What the research says (US data)

“When working smoke alarms are present in your home, the risk of dying in a home fire is cut by 60 percent, according to the latest NFPA research.” (National Fire Protection Association). This figure is based on US data.

Where to put smoke alarms

The NFPA advises installing smoke alarms inside and outside every bedroom and sleeping area, such as a hallway, and on every level of the home, including the basement. An alarm should be on the ceiling or high on a wall.

Keep alarms away from the kitchen to reduce nuisance alarms; the NFPA says at least 10 feet (3 metres) from the cooker. It also advises against putting smoke alarms in kitchens or bathrooms. Always check the manufacturer’s instructions for the best spot.

Note

The NFPA says only qualified electricians should install hardwired smoke alarms. If your new home has wired alarms that need changing, book a professional.

Testing and maintenance

Test every smoke alarm once a month by pressing the test button and listening for the loud beep. If it does not sound, change the battery or, if the unit is over 10 years old, replace it (NFPA).

Follow the manufacturer’s cleaning instructions as well, so dust does not affect the sensor.

What the sounds mean

The NFPA explains the common sounds:

  • Three loud beeps, repeated: smoke or fire. Get out, call the emergency number and stay out.
  • A single chirp every 30 or 60 seconds: the battery is low and must be changed.
  • Chirping after a new battery: the alarm has reached the end of its life and must be replaced.

Moving-in checklist

Smoke alarms on moving day

1

Count and map: check there is an alarm in each bedroom, outside sleeping areas and on every level.

2

Check the dates: find the manufacturing date on each unit and replace any older than 10 years.

3

Test each one: press the test button and listen for the beep.

4

Fill the gaps: add alarms where the NFPA placement guidance shows one missing.

5

Set a reminder: schedule a monthly test in your phone.

Tip

Make sure everyone at home knows the sound of the alarm and your escape plan.

For more first-week tasks, see our first-time homebuyer checklist and homeowners insurance basics.

Frequently asked questions

How many smoke alarms does a home need?

The NFPA advises alarms inside and outside every bedroom and sleeping area and on every level, including the basement. Local codes may add requirements.

How often should I test smoke alarms?

Once a month, by pressing the test button (NFPA).

Why is my smoke alarm chirping?

A single chirp every 30 or 60 seconds usually means a low battery. If it continues after a new battery, the unit needs replacing.

Can I put a smoke alarm in the kitchen?

The NFPA advises against it and suggests at least 10 feet (3 metres) from the cooker to reduce nuisance alarms.

Last checked: 16 November 2026. Source: National Fire Protection Association smoke alarm guidance linked above.